Developing
Use MDS-PS developer or a suitable alternative. Processing temperature: 22–25°C; dwell time: 25–35 seconds.

Our blue-coated UV-CTCP plate uses an electrochemically grained and anodized aluminium substrate. It is suitable for medium-run sheet-fed and web offset presses.
Watch plate handling and preparation in this short demonstration.
| Parameter | Specification |
|---|---|
| Plate type | Positive-working UV-CTP / CTCP offset plate |
| Substrate | Electrochemically grained and anodized aluminium |
| Coating colour | Blue |
| Thickness | 0.15 / 0.20 / 0.25 / 0.30 / 0.40 mm |
| Maximum plate size | 1,460 mm on one side |
| Spectral sensitivity | 350–450 nm; peak at 400 nm |
| Exposure energy | 50–70 mJ/cm² |
| Resolution | 2–98% at 200 lpi |
| FM capability | 20 microns |
| Safelight | UV-filtered or yellow safelight |
| Shelf life | 18 months below 30°C, at 30–70% relative humidity |
| Run length without baking | Approximately 100,000 prints |
Use MDS-PS developer or a suitable alternative. Processing temperature: 22–25°C; dwell time: 25–35 seconds.
Developer replenishing rate: 90 ml/m². Plate baking: 220°C for 5 minutes.
Actual run length varies with the paper, ink and press conditions.
Send us your specifications and quantity for product information and a quotation.