Development
Use developers and processors suitable for thermal plates. The specified immersion development time is 25 ± 5 seconds.

Our double-layer thermal CTP plate is designed for long print runs and UV ink resistance. It works with 800–850 nm infrared laser imaging and requires no preheating.
See the blue-coated plate surface and handling in this product demonstration.
| Parameter | Specification |
|---|---|
| Model | CTP-S |
| Plate type | Thermal positive offset plate |
| Coating colour | Blue |
| Standard thickness | 0.15 / 0.20 / 0.25 / 0.30 / 0.40 mm |
| Spectral sensitivity | 800–850 nm; peak at 830 nm |
| Exposure energy | 110–130 mJ/cm² |
| Screen reproduction | 1–99% at 200 lpi |
| Preheating | Not required |
| Processing temperature tolerance | 20–25°C |
| Processing time tolerance | 20–40 seconds |
| Print run | 200,000–300,000 impressions |
| UV ink resistance | 50,000–100,000 impressions |
| Shelf life | 18 months |
| Storage conditions | Below 30°C; relative humidity 10–60% |
Use developers and processors suitable for thermal plates. The specified immersion development time is 25 ± 5 seconds.
Apply a suitable protective gum before baking. Static oven: 200–230°C for 8–10 minutes. Online oven: 240°C for 5–6 minutes.
Recommended fountain solution pH: 4.8–5.2; conductivity: 800–1,500 µS. Store away from light in a dry place; do not stack more than 250 kg.
Send us your specifications and quantity for product information and a quotation.